How to reconstitute peptides
Reviewed 7 sourcesPublished by PepVault
How to reconstitute a peptide vial step by step: how much bacteriostatic water to add, how to mix it without shaking, how to work out the units, and storage.

- Last reviewed
- Sources
- 7
- Questions
- 8
- Compounds
- 1
The short answer
Wipe both stoppers with alcohol, then run bacteriostatic water slowly down the inside wall of the vial and swirl gently, never shake, until the liquid is clear. The water sets the strength: a 5 mg vial with 2 mL is 2.5 mg/mL, so 250 mcg is 10 units on a U-100 insulin syringe. Write the date on the vial and keep it in the fridge.
Evidence: The method comes from the FDA labels and instructions for approved powdered peptide products (somatropin, tesamorelin), the bacteriostatic water label and CDC injection-safety guidance; no published study covers mixing research peptides such as BPC-157 at home.

What do you need before you start?
What you need
- The peptide vial, with its strength in milligrams on the label.
- Bacteriostatic water, or the liquid a product's own instructions name.
- U-100 insulin syringes, where 100 units fill 1 mL7: one to add the water, and a new one for every dose.
- Alcohol swabs and a sharps container, a puncture-proof box for used needles.
Bacteriostatic water is sterile water with 0.9% benzyl alcohol (some bottles 1.1%), a preservative that lets a multiple-dose container be entered again and again3. Plain sterile water has no preservative, so it suits a vial that is used up in one go; one somatropin label says a vial mixed with sterile water gives one dose only5. For a vial you will draw from for days or weeks, the bacteriostatic kind is the one to use. The glossary's entry on bacteriostatic water covers the rest.

PepVault for iPhone
Keep your protocol in PepVault
PepVault records the vial you mixed: the strength printed on the label, the date you mixed it and a batch note. Its expiry warning starts at 28 days and takes any window you set, so the vial reads like "Mixed Nov 20 · good to Dec 18".
7 days free on the yearly plan for new subscribers.
What does reconstituting a peptide actually do?
Most research peptides arrive lyophilized, which means freeze-dried: a dry white cake or a few flakes at the bottom of a small glass vial. Approved peptide products such as somatropin (growth hormone) and tesamorelin ship the same way, as a powder with the liquid packed beside it46. Reconstituting is adding a measured amount of that liquid so the powder dissolves into something a syringe can measure.
The water never changes how much peptide is in the vial, only how concentrated it is. A 5 mg vial holds 5,000 mcg, which is twenty 250 mcg doses whether you add 1 mL or 3 mL. What changes is the concentration, the amount of peptide in each millilitre (mg/mL), and with it how far you pull the plunger for each dose.
How much bacteriostatic water should you add?
There is no single correct volume. The best one puts your dose on a clean, readable mark of the syringe. Three numbers decide it: the vial's milligrams, the millilitres of water and the dose. One formula links them, the same one PepVault's website calculator runs: units = dose in mcg × water in mL ÷ (vial in mg × 10).
Here it is for a 5 mg BPC-157 vial and a 250 mcg dose, the low end of the 200 to 500 mcg range PepVault's library lists from community use. With 2 mL of water: 250 × 2 ÷ (5 × 10) = 10 units, which is 0.1 mL. The vial is then 2.5 mg/mL and holds 20 doses of that size.
| Vial | Water | Strength | 250 mcg is | 500 mcg is |
|---|---|---|---|---|
| 5 mg | 1 mL | 5 mg/mL | 5 units | 10 units |
| 5 mg | 2 mL | 2.5 mg/mL | 10 units | 20 units |
| 5 mg | 2.5 mL | 2 mg/mL | 12.5 units (between whole marks) | 25 units |
| 5 mg | 3 mL | 1.67 mg/mL | 15 units | 30 units |
| 10 mg | 2 mL | 5 mg/mL | 5 units | 10 units |
Two patterns stand out. Too little water makes the draw tiny: at 5 units, one unit off is a 20% error. The FDA's alert on dosing errors with compounded semaglutide vials describes several reports of patients told to draw small doses, such as 5 units (0.05 mL), with a 1 mL U-100 syringe7. And an odd volume such as 2.5 mL puts 250 mcg between the whole-unit marks. For that dose, 2 mL lands it on the numbered 10 mark. The water also has to fit in the vial, so check its size before planning 3 mL.
Try it
Work out your draw
The calculator the app uses. Put in your vial, your water and your dose, and it shows the units to draw on a U-100 syringe.
Your vial and dose
Example numbersDraw to
40unitson a U-100 syringe
Lands on a numbered mark
- Concentration
- 5 mg/mL5,000 mcg/mL
- Doses per vial
- 5
How do you draw the water into the syringe?
- Wash and dry your hands6.
- Lay out the peptide vial, the water, a new syringe, alcohol swabs and the sharps container on a clean, flat surface6.
- Flip the plastic caps off both vials46.
- Wipe each rubber stopper with an alcohol swab, and don't touch a stopper once it is clean46.
- Pull the plunger back to your planned volume, which fills the syringe with air6.
- Push the needle straight into the water bottle's stopper6.
- Turn the bottle and syringe upside down together6.
- Push the air into the bottle6.
- Pull the plunger slowly back to your mark6.
- Turn the bottle right side up and take the needle out6.
- Hold the syringe needle up and tap it so large bubbles rise to the top6.
- Push the plunger up slowly until the bubbles are out and it sits on your mark6.
How do you mix a peptide vial, step by step?
- Push the needle through the peptide vial's stopper4.
- Point the needle at the glass wall and push the plunger slowly, so the water runs down the side and not onto the powder. Both somatropin labels say to aim at the wall to prevent foaming45.
- Take the needle out and drop the syringe in the sharps container. The rule is one needle, one syringe, only one time1.
- Swirl the vial gently in small circles until the powder is gone. Do not shake it: the somatropin label says shaking or vigorous mixing makes the solution cloudy4.
- Let it rest a few seconds so any foam settles6.
- Hold it to the light. It should be clear, with no particles and no change of colour36; if it isn't, don't use it34.
- Write the date you mixed it and its strength (for example, "2.5 mg/mL") on the vial label4.

PepVault records the vial you mixed: the strength printed on the label, the date you mixed it and a batch note. Its expiry warning starts at 28 days and takes any window you set, so the vial reads like "Mixed Nov 20 · good to Dec 18". Track your vials in PepVault
How do you draw a dose from a mixed vial?
The slips that matter are about units, not mixing. The FDA said that unfamiliarity with drawing from a vial, together with confusion between millilitres, milligrams and units, may have contributed to dosing errors7. The three checks that catch the usual ones sit inside the steps below.
- Take a new U-100 syringe. A vial is always entered with a new needle and a new syringe2. The units in this guide assume U-100: a U-40 syringe holds 40 units per mL, so a U-100 count drawn on it is 2.5 times the volume.
- Wipe the stopper with a fresh alcohol swab46.
- Check your dose is in the right unit: 250 mcg is 0.25 mg, and a dose in the wrong one is off by a factor of 1,000.
- Pull the plunger back to the units of your dose, which fills the syringe with air4.
- Push the needle through the centre of the stopper4.
- Push the air into the vial4.
- Turn the vial upside down, keeping the needle tip under the liquid4.
- Pull the plunger slowly to your mark46. On a U-100 syringe a unit is a hundredth of a millilitre, so 10 units is 0.1 mL7.
- Tap the syringe so any bubbles rise to the top6.
- Push the plunger to the exact line6.
- Take the needle out of the vial. Never leave a needle in the stopper for later1.


PepVault counts doses left from the label's amount and the doses you log, and shows the draw you typed as your own record ("Your draw · 10 u"). The app works out no units: those come from your own math or the website calculator. Track your vials in PepVault
How long does a mixed peptide vial last?
Store it the way the somatropin label stores its mixed vial: in the fridge at 2–8 °C, protected from light and never frozen4. Tesamorelin is the exception that shows labels differ: once mixed it stays at room temperature and is not refrigerated6.
How long a mixed research vial lasts is where the published data runs out. We found no published study of BPC-157's stability in bacteriostatic water. The water's own label says not to store a reconstituted drug unless that drug's maker says you can3, and a research vial comes with no such instructions. The closest reference points come from approved products:
| Product, once opened or mixed | Kept | Discarded after |
|---|---|---|
| Somatropin 5 mg vial (Zomacton) | Fridge | 14 days4 |
| Somatropin 10 mg vial (Zomacton) | Fridge | 28 days4 |
| Tesamorelin vial (Egrifta WR) | Room temperature | 7 days6 |
| Bacteriostatic water bottle | Room temperature | 28 days after first use6 |
| Any opened multi-dose vial, in clinics | As labelled | 28 days, unless the maker says otherwise1 |
Commonly reported: users keep mixed research vials in the fridge and choose the vial size and dose so each vial is finished within about four weeks. That is a habit people report, not a measured shelf life.
At 250 mcg a day, a 5 mg vial is used up in 20 days. The reconstituted peptide expiry tool on the site does that date math for any vial. If the liquid turns cloudy, grows particles or changes colour, it is not used34.
When to get help If an injection site turns redder, more swollen or more painful over the next few days instead of settling, or you get a fever, have a doctor look at it.
Is it different for tirzepatide or semaglutide?
The method is the same; the numbers change. GLP-1 vials hold more milligrams, the doses are counted in milligrams rather than micrograms, and the dose changes over time, so the water is chosen for the dose you are on now. The tirzepatide and semaglutide guides work through those vials, and the units guide shows why 2.5 mg has no fixed number of units. The reconstitution calculator also has a page for each common vial, from BPC-157 5 mg to tirzepatide 60 mg.
Sources
- Centers for Disease Control and Prevention. Preventing unsafe injection practices. Injection Safety. 2024. cdc.gov
- Centers for Disease Control and Prevention. Considerations for blood glucose monitoring and insulin administration. Injection Safety. 2024. cdc.gov
- Hospira. Bacteriostatic Water for Injection, USP: prescribing information. DailyMed. dailymed.nlm.nih.gov
- Ferring Pharmaceuticals. ZOMACTON (somatropin) for injection: prescribing information and Instructions for Use. DailyMed. dailymed.nlm.nih.gov
- EMD Serono. SEROSTIM (somatropin) for injection: prescribing information. DailyMed. dailymed.nlm.nih.gov
- Theratechnologies. EGRIFTA WR (tesamorelin) for injection: prescribing information and Instructions for Use. Revised 03/2025. DailyMed. dailymed.nlm.nih.gov
- U.S. Food and Drug Administration. FDA alerts health care providers, compounders and patients of dosing errors associated with compounded injectable semaglutide products. 2024. fda.gov
Newsletter · Weekly
The weekly peptide briefing.
New guides, the week’s peptide news, one tool. Free, one email a week, unsubscribe anytime.