What is bacteriostatic water?
Reviewed 8 sourcesPublished by PepVault
Bacteriostatic water is sterile water with benzyl alcohol, usually 0.9%, for vials used more than once. How it differs from sterile water and how long it keeps.

- Last reviewed
- Sources
- 8
- Questions
- 6
- Compounds
- 3
The short answer
Bacteriostatic water is sterile water for injection with benzyl alcohol added, usually 0.9%, a preservative that holds back bacteria so one bottle can be drawn from many times. Plain sterile water has no preservative and is meant to be used once. Write the date on the bottle when you first puncture it: the CDC's default for an opened multi-dose vial is 28 days, unless its label gives another date.
Evidence: Every fact comes from FDA-listed labels on DailyMed (the two waters, Egrifta SV and WR, Novarel, Gonal-f, Omnitrope) and the CDC's injection-safety guidance; no study measures research peptides in bacteriostatic water.

What is bacteriostatic water?
Tesamorelin, an approved peptide, is sold in two versions, and the water packed with each changes how the vial is used. Egrifta SV ships with plain sterile water: you mix one vial, inject one dose straight away and throw the rest out4. Egrifta WR ships with bacteriostatic water: you mix one vial on day one and draw from it for seven daily doses5. The water decides whether a vial is a one-shot or a vial you come back to.
Bacteriostatic Water for Injection, USP is sterile, nonpyrogenic water (free of substances that cause fever) with 0.9% (9 mg/mL) or 1.1% (11 mg/mL) benzyl alcohol added as a preservative. It comes in a multiple-dose container "from which repeated withdrawals may be made to dilute or dissolve drugs for injection"1. USP means it meets the United States Pharmacopeia's published standard for that product. The label allows one use only: dissolving or diluting another drug for injection under the skin, into a muscle or into a vein, following that drug maker's instructions1.
"Bacteriostatic" means it holds bacteria back from multiplying; it does not sterilise anything. The CDC puts the limit plainly: a multi-dose vial's preservative helps limit the growth of bacteria, but "does not have an effect on viruses nor does it provide complete protection against bacterial contamination"3. Clean technique still does most of the work.

How is bacteriostatic water different from sterile water?
Both start as the same water for injection. The difference is one ingredient, and it changes how each bottle may be used. Sterile Water for Injection "contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers"2.
| Point | Bacteriostatic water | Sterile water for injection |
|---|---|---|
| What is added | 0.9% or 1.1% benzyl alcohol1 | Nothing2 |
| Container | Multiple-dose vial1 | Single-dose vial2 |
| After the first draw | Repeated withdrawals allowed1 | "Do not reuse single-dose containers. Discard unused portion."2 |
| Newborns | Not for use in neonates1 | The water the label names for neonates1 |
| Unopened storage | Room temperature, 20 to 25 °C1 | Room temperature, 20 to 25 °C2 |

So sterile water is not a worse product. It is the right one for a single dose mixed and used at once, and the only one for newborns. Bacteriostatic water is the one for a mixed vial that will be entered again over days.
Which water should a peptide vial be mixed with?
The drug decides, not the water. Both water labels say to use them "according to instructions of the manufacturer of the drug to be administered"12. Approved peptides that come as a powder name their diluent, the liquid that dissolves them: Egrifta SV says to use only the sterile water provided4, and Egrifta WR, Novarel (hCG) and multi-dose Gonal-f name bacteriostatic water567.
A research vial has no maker's instructions, so the choice comes down to how the vial will be used. A vial that will be drawn from over days or weeks is the case bacteriostatic water exists for. The bacteriostatic water label adds one caution: some drugs are incompatible with a vehicle that contains benzyl alcohol, and the drug's own instructions are the place that says so1. How much water to add and how to mix it without foaming is a separate question, covered step by step in the reconstitution guides for tirzepatide and semaglutide.
How long does an opened bottle of bacteriostatic water last?
The bottle's own label gives an expiry date for the unopened bottle and room-temperature storage at 20 to 25 °C, but no count of days once it is opened1. The 28-day figure people quote comes from two places.
- The CDC's injection-safety guidance, drawn from USP General Chapter 797, the pharmacists' standard for sterile preparations: "Once a multi-dose vial is opened (e.g., needle-punctured) the vial should be dated and discarded within 28 days unless the manufacturer states another date for that opened vial." It adds that this date should never run past the manufacturer's original expiry3.
- The Egrifta WR instructions, the clearest patient-facing example: "Throw away (discard) any Bacteriostatic Water for Injection left in the bottle 28 days after first use," with a space on the back of the Injection Box to record the date of first use5.
The clock starts at the first needle puncture, not on the day you bought the bottle. An unopened bottle is good until its printed expiry date3. Handling a bottle, in the order the hands move:
- Check the expiry date printed on the bottle before the first use5.
- Flip off the plastic cap and wipe the rubber stopper with an alcohol swab5.
- Puncture the stopper with a new, sterile needle and syringe.
- Draw what you need.
- Pull the needle out: never leave a needle in the stopper for later draws3.
- Write the date of that first puncture on the bottle or its box35.
- Store it as the label says, at 20 to 25 °C1.
- Wipe the stopper again before every later draw.
- Throw it out 28 days after the first puncture, or at its printed expiry if that comes first3, and sooner if the water is not clear1.

Commonly reported: a 30 mL bottle lasts many mixes, so people often reach day 28 with most of it left. People also report a brief sting when they inject and put it down to the benzyl alcohol. These are user reports, not measurements.
When to get help If an injection site turns redder, more swollen or more painful over the next few days instead of settling, or you get a fever, have a doctor look at it.
Does the 28-day rule apply to a mixed peptide vial?
Not automatically. The CDC rule is written for health care staff handling vials a manufacturer labelled as multi-dose3. A peptide you mixed yourself is a new preparation, and the bacteriostatic water label says: "Do not store reconstituted solutions of drugs for injection unless otherwise directed by the manufacturer of the solute"1. Approved products mixed with bacteriostatic water each set their own limit, and they differ:
| Approved product | Mixed with | Once mixed |
|---|---|---|
| Egrifta SV (tesamorelin) | Sterile water | Inject at once, discard the rest4 |
| Egrifta WR (tesamorelin) | Bacteriostatic water | Room temperature, discard after 7 days5 |
| Omnitrope 5.8 mg (somatropin) | Bacteriostatic water, 1.5% benzyl alcohol | Fridge, use within 21 days8 |
| Gonal-f multi-dose (follitropin alfa) | Bacteriostatic water, 0.9% | Fridge or room temperature, discard after 28 days7 |
| Novarel (hCG) | Bacteriostatic water, 0.9% | Fridge, use within 30 days6 |
The water bottle and the mixed vial therefore run on two separate clocks. The bottle's 28 days start at its first puncture; a mixed vial's days start on the day it was mixed and depend on the peptide in it. For a research peptide no maker has set that number, so the table shows only how far apart labelled products land, not a shelf life for any research vial.

- Date both: the water bottle on its first puncture, and each mixed vial on the day it was mixed.
- In the PepVault app, a vial's record holds the day you mixed it and an expiry warning that starts at 28 days and takes any number you set, a batch note for which water you used, and your doses left; in its last 7 days the vial list shows how many days remain.
Why does the label say not for newborns?
Every bottle carries the line "WARNING: NOT FOR USE IN NEONATES"1. Benzyl alcohol has been associated with toxicity in newborn babies, and the Novarel label reports it has been associated with a fatal "gasping syndrome" in premature infants16. That is why the label says only preservative-free sterile water should be used to prepare medicines for neonates1.
For adults the picture is calm. The label says reactions to 0.9% benzyl alcohol given into a vein, a muscle or under the skin "are not known to occur in man," and that animal studies estimate up to 30 mL could be given into a vein to an adult without toxic effects1. For scale, a daily Egrifta WR dose is 0.16 mL of liquid5. The label also says it should not be used for fluid replacement or in epidural or spinal procedures, and that no animal reproduction studies have been done, so in pregnancy it should be given only if clearly needed1.
Bacteriostatic water is a prescription product in the US ("Rx only" on the label1). This guide explains the water; it does not tell anyone what to mix or inject.
Sources
- Hospira. Bacteriostatic Water for Injection, USP: prescribing information. Revised 08/2019. DailyMed. dailymed.nlm.nih.gov
- Hospira. Sterile Water for Injection, USP (single-dose vial): prescribing information. Revised 3/2025. DailyMed. dailymed.nlm.nih.gov
- Centers for Disease Control and Prevention. Preventing unsafe injection practices: key points for multi-dose vials. 2024. cdc.gov
- Theratechnologies. EGRIFTA SV (tesamorelin) for injection: prescribing information and Instructions for Use. Revised 03/2024. DailyMed. dailymed.nlm.nih.gov
- Theratechnologies. EGRIFTA WR (tesamorelin) for injection: prescribing information and Instructions for Use. Revised 03/2025. DailyMed. dailymed.nlm.nih.gov
- Ferring Pharmaceuticals. NOVAREL (chorionic gonadotropin) for injection: prescribing information. Rev. 05/2023. DailyMed. dailymed.nlm.nih.gov
- EMD Serono. GONAL-f (follitropin alfa) for injection: prescribing information. Revised 03/2025. DailyMed. dailymed.nlm.nih.gov
- Sandoz. OMNITROPE (somatropin) injection: prescribing information and Instructions for Use. SPL of 07/2025. DailyMed. dailymed.nlm.nih.gov
Newsletter · Weekly
The weekly peptide briefing.
New guides, the week’s peptide news, one tool. Free, one email a week, unsubscribe anytime.