How to read an insulin syringe
Reviewed 15 sourcesPublished by PepVault
An insulin syringe measures liquid: on U-100, 1 unit is 0.01 mL. What each line is worth on 0.3, 0.5 and 1 mL barrels, the plunger tip, and 31G 5/16".

- Last reviewed
- Sources
- 15
- Questions
- 10
- Compounds
- 1
The short answer
An insulin syringe measures liquid, not drug. On a U-100 syringe, 100 units fill 1 mL, so one unit is 0.01 mL. Check that the barrel or box says U-100, count the small lines between two printed numbers to learn what one line is worth, then set the plunger tip, its rubber stopper, exactly on your line.
Evidence: Syringe facts come from FDA device records (a 510(k) clearance and UDI database entries), Lilly's insulin labels and MedlinePlus; accuracy and dead-space figures come from one small user study and one lab study, and the unit figures are arithmetic.

What do you need?
What you need
- A U-100 insulin syringe in the smallest size that holds your draw: 0.3, 0.5 or 1 mL13.
- Your draw written in units and in mL, from your prescriber, the label or the reconstitution calculator.
- The vial, an alcohol swab and a sharps container for the used syringe5.
- Good light, and a clip-on syringe magnifier if the marks are hard to see1.

What is a unit on an insulin syringe?
A unit on the barrel is a volume. Standard insulin holds 100 units in 1 mL, which is called U-100, and most insulin syringes are marked for it1. So on a U-100 syringe, 1 unit is 0.01 mL, 10 units is 0.1 mL and 100 units is a full millilitre. The syringe does not know what is dissolved in the liquid. What a unit of your vial holds depends on how strong the vial is, in mg per mL, and that is set by the water that went in.
Two words cause most of the confusion. A unit on a syringe is a step of volume, not an amount of drug, and not the same thing as an international unit (IU), the measure of a drug's effect printed on some labels. A syringe unit counts a drug's own units only when the liquid holds 100 of them per mL, as U-100 insulin does; U-500 insulin packs five times as much into the same volume, which is why it has a syringe of its own6. And cc means mL: one cubic centimetre is the same amount as one millilitre, so a box that says 3/10 cc holds a 0.3 mL syringe2. The glossary's entries on syringe units, IU and the U-100 syringe have the short versions.
How do you tell a syringe is U-100?
Read the barrel and the box: a U-100 syringe says U-100. In BD's FDA clearance, its 0.3, 0.5 and 1 mL insulin syringes are all for U-100 insulin and carry an orange needle cover3. Lilly's U-500 insulin has its own U-500 syringe, with a green U-500 symbol and a green needle shield, and its label warns that a U-100 syringe can give five times the dose6. Other scales, such as U-40, exist too; our guide on how many units 2.5 mg is covers what goes wrong when a U-100 count meets a U-40 barrel.
Every unit figure on this page, on the reconstitution calculator and on the vial pages assumes a U-100 barrel.
What does each line mean on a 0.3, 0.5 and 1 mL syringe?
The three common U-100 barrels hold 30, 50 and 100 units. What changes between them is how fine the scale is. BD's clearance lists the marking on each3:
| Barrel | Holds | One small line (BD) | One line in mL |
|---|---|---|---|
| 0.3 mL (3/10 cc) | 30 units | 1 unit, or ½ unit on half-unit models | 0.01 mL (0.005 mL) |
| 0.5 mL (1/2 cc) | 50 units | 1 unit | 0.01 mL |
| 1 mL (1 cc) | 100 units | 2 units | 0.02 mL |

Scales are not the same across brands. MedlinePlus describes a standard 1 mL insulin syringe with a small notch for every unit1, while BD's 1 mL barrel is marked every 2 units3. That is why the reliable method is to count: pick two printed numbers next to each other, count the gaps between them, and divide. Ten units between the 10 and the 20 split into five gaps means each line is worth 2 units.
Half-unit barrels add a line between each whole unit on a 0.3 mL syringe. FDA's device database lists one, the BD Ultra-Fine 0.3 mL, as U-100 with a half-unit scale4. On a barrel like that a draw of 7.5 units has a line of its own; on a whole-unit barrel it falls between two lines.
How many units is 0.1 mL, 0.25 mL or 0.5 mL?
On U-100, millilitres times 100 gives units. These hold for any peptide and any vial, because they are only the scale:
| Millilitres | Units on U-100 | Smallest barrel that holds it |
|---|---|---|
| 0.01 mL | 1 unit | 0.3 mL |
| 0.05 mL | 5 units | 0.3 mL |
| 0.1 mL | 10 units | 0.3 mL |
| 0.25 mL | 25 units | 0.3 mL |
| 0.3 mL | 30 units | 0.3 mL, filled to the top |
| 0.5 mL | 50 units | 0.5 mL |
| 1 mL | 100 units | 1 mL |
Getting from a dose in mg or mcg to millilitres needs the vial's strength. As a worked example, not a dose recommendation: a 5 mg vial with 2 mL of water holds 2.5 mg per mL, so 250 mcg is 0.1 mL, the 10-unit line. The same 250 mcg from a 10 mg vial with 2 mL is 0.05 mL, 5 units. Set your own vial, water and amount below to see the line it lands on; the step-by-step for tirzepatide's 2.5 mg is in our units guide.
Try it
Work out your draw
The calculator the app uses. Put in your vial, your water and your dose, and it shows the units to draw on a U-100 syringe.
Your vial and dose
Example numbersDraw to
40unitson a U-100 syringe
Lands on a numbered mark
- Concentration
- 5 mg/mL5,000 mcg/mL
- Doses per vial
- 5
How do you read the plunger against the line?
- Check that the barrel or the box says U-100. If it says U-40 or U-500, stop here: no unit count on this page applies to it.
- Count the small lines between two printed numbers to learn what one line is worth on your syringe.
- Find your line before the needle goes into the vial, and say the draw in mL as well (10 units is 0.1 mL), so a 5 misread as 50 stands out.
- Wipe the vial's rubber stopper with an alcohol swab and let it dry1.
- Pull the plunger back until its tip reaches your line, which fills the syringe with that much air15.
- Push the needle through the stopper and press the plunger all the way in, so the air goes into the vial15.
- Turn the vial upside down and, with the needle tip in the liquid, pull the plunger slowly to a few units past your line15.
- Tap the syringe gently so any bubbles rise to the top, then push them back into the vial15. A bubble takes space on the scale and holds no liquid.
- Push the plunger slowly until the plunger tip, its rubber stopper, sits on your line35.
- Look at the syringe again to check the dose before you take the needle out of the vial15.

Lilly's own insulin instructions read the dose at the plunger tip, for U-100 and U-500 syringes alike56, and in BD's FDA clearance the plunger tip is the rubber stopper3.
- Write the draw with its unit every time: "10 units" or "0.1 mL", never a bare 10.
- In the PepVault app, the log sheet keeps the draw you typed for your dose, in units, mL or pen clicks, with the syringe you use (0.3, 0.5 or 1 mL), and shows a draw in units on that barrel. If the units are more than that syringe holds, it says so. The app records your numbers and works none of them out; the reconstitution calculator on pepvault.app does the math.
What do 31G and 5/16" on the box mean?
The box prints the needle's two sizes. G is the gauge, its thickness, and a higher number is a thinner needle: a 33-gauge tip is thinner than a 32-gauge needle11. BD's insulin syringes run from 27G to 31G3. The fraction is the length in inches, often printed beside millimetres8910:
| On the box | Needle length | Example record |
|---|---|---|
| 15/64" | 6 mm | 3/10 mL, 31 gauge, 6 mm (15/64")8 |
| 5/16" | 8 mm | 0.3 cc, 31G, 5/16" 8 mm9 |
| 1/2" | 12.7 mm | 1 mL, 29G, 1/2" (12.7 mm)10 |

So 31G 5/16" is a 31-gauge needle 8 mm long. In a review of 22 studies of insulin pen needles, higher gauge and shorter length went with less injection pain12, and expert insulin guidance calls 6 mm syringe needles a first-line choice13. Which length suits which spot, and how deep the fat is, is in our guide on where to inject peptides.
Does any liquid stay in the syringe?
A little, and on insulin syringes very little. Dead space is the liquid left in the needle and hub after the plunger is pushed all the way in. Insulin syringes have the needle fixed to the barrel, a design that leaves very little behind: in a lab test, one with a fixed 27G ½" needle kept back 1.3 microlitres, about 0.13 of a unit, while syringes with detachable needles kept 7.5 to 17.8 microlitres, about 0.75 to 1.8 units14. BD tests dead space on its insulin syringes as part of their FDA clearance3. In that test, what stayed in the insulin syringe was about a tenth of one unit.
Which syringe makes a small draw easiest to read?
The smallest barrel that holds the whole draw. Its lines are worth less, so the draw spans more of them: 5 units is five lines up on a 0.3 mL barrel, while on a BD 1 mL barrel it falls halfway between the 4 and 6 lines3. Small draws are also where syringes are least exact. When 48 people, 32 children with type 1 diabetes and 16 parents, measured out a test liquid standing in for regular insulin with syringes, the average error was 9.9% on doses under 5 units and 3.2% above 515.
Commonly reported: people new to vials say the 2-unit lines on a 1 mL barrel tripped them up at first, and that switching to a 0.3 mL barrel made a small draw much easier to see.
Which syringe misreads are most common?
The FDA collected dosing-error reports with compounded semaglutide and most of the reports said the patients were unfamiliar with measuring a dose with a syringe. In several, patients told to draw 5 units (0.05 mL) on a U-100 syringe took 50 units, ten times the dose, and the FDA says confusion between millilitres, milligrams and units may have contributed7. Two more slips sit outside the steps above:
- A bare number: "5" on a note can mean 5 units, 0.5 mL or 5 mg. Keep the unit with the number everywhere you write it.
- A new box: a new size or brand can change what one line is worth. Count the lines again before the first draw.
When to get help If you think a dose went in at the wrong amount, call your prescriber or a pharmacist and tell them what you drew and on which syringe.
Sources
- MedlinePlus (U.S. National Library of Medicine). Giving an insulin injection. Review date 7/21/2024. medlineplus.gov
- MedlinePlus (U.S. National Library of Medicine). Drawing medicine out of a vial. Review date 1/14/2026. medlineplus.gov
- U.S. Food and Drug Administration. 510(k) K190054: BD Insulin Syringe (0.3 mL, 0.5 mL and 1 mL, for U-100 insulin), clearance letter and 510(k) summary. Becton, Dickinson and Company. 2019. accessdata.fda.gov
- U.S. FDA / NLM AccessGUDID. BD Ultra-Fine insulin syringe, U-100, 8 mm, 31G, 0.3 mL, 1/2 unit (model 328440, DI 00382908440035). accessgudid.nlm.nih.gov
- Eli Lilly and Company. HUMULIN R (insulin human) injection, U-100: prescribing information, patient information and vial Instructions for Use. DailyMed. dailymed.nlm.nih.gov
- Eli Lilly and Company. HUMULIN R U-500 (insulin human) injection: prescribing information, patient information and Instructions for Use. Revised 07/2026. DailyMed. dailymed.nlm.nih.gov
- U.S. Food and Drug Administration. FDA alerts health care providers, compounders and patients of dosing errors associated with compounded injectable semaglutide products. 2024. fda.gov
- U.S. FDA / NLM AccessGUDID. ReliOn insulin syringes, 3/10 mL, 31 gauge, 6 mm (15/64"), U-100 (DI 00681131138383). accessgudid.nlm.nih.gov
- U.S. FDA / NLM AccessGUDID. US Diagnostics U-100 insulin syringe, 0.3 cc, 31G, 5/16" 8 mm (Carelife, DI 00857513006520). accessgudid.nlm.nih.gov
- U.S. FDA / NLM AccessGUDID. H-E-B In-Control insulin syringe, 1 mL, 29G, 1/2" (12.7 mm) (DI 00041220791484). accessgudid.nlm.nih.gov
- Nagai Y et al. Comparison between shorter straight and thinner microtapered insulin injection needles. Diabetes Technol Ther. 2013. PubMed 23621793
- Mannucci E et al. Needle characteristics and the insulin injection experience in patients with diabetes. Acta Diabetol. 2025. PubMed 40481976
- Frid AH et al. New insulin delivery recommendations. Mayo Clin Proc. 2016. PubMed 27594187
- Binka M et al. Survival of hepatitis C virus in syringes is dependent on the design of the syringe-needle and dead space volume. PLoS One. 2015. PubMed 26536599
- Lteif AN, Schwenk WF. Accuracy of pen injectors versus insulin syringes in children with type 1 diabetes. Diabetes Care. 1999. PubMed 10333915
Newsletter · Weekly
The weekly peptide briefing.
New guides, the week’s peptide news, one tool. Free, one email a week, unsubscribe anytime.