# How to reconstitute peptides · PepVault guides

Source: https://pepvault.app/guides/how-to-reconstitute-peptides

Last updated: 2026-11-20

Use: © PepVault. Read and cite with a link. Copying, bulk scraping, rewriting or republishing is not permitted (https://pepvault.app/terms#content).

[Guides](https://pepvault.app/guides) [Getting started](https://pepvault.app/guides#getting-started)

# How to reconstitute peptides

Reviewed November 2026 7 sources [Published by PepVault](https://pepvault.app/guides/how-we-research)

How to reconstitute a peptide vial step by step: how much bacteriostatic water to add, how to mix it without shaking, how to work out the units, and storage.

- **Last reviewed:** Nov 20, 2026
- **Sources:** 7
- **Questions:** 8
- **Compounds:** 1

## The short answer

Wipe both stoppers with alcohol, then run bacteriostatic water slowly down the inside wall of the vial and swirl gently, never shake, until the liquid is clear. The water sets the strength: a 5 mg vial with 2 mL is 2.5 mg/mL, so 250 mcg is 10 units on a U-100 insulin syringe. Write the date on the vial and keep it in the fridge.

Every number checked at its primary source · Nov 20, 2026 · [7 sources](https://pepvault.app/guides/how-to-reconstitute-peptides#sources) · [How we research](https://pepvault.app/guides/how-we-research)

**Evidence:** The method comes from the FDA labels and instructions for approved powdered peptide products (somatropin, tesamorelin), the bacteriostatic water label and CDC injection-safety guidance; no published study covers mixing research peptides such as BPC-157 at home.

## What do you need before you start?

What you need

- The peptide vial, with its strength in milligrams on the label.
- Bacteriostatic water, or the liquid a product's own instructions name.
- U-100 insulin syringes, where 100 units fill 1 mL[7](https://pepvault.app/guides/how-to-reconstitute-peptides#source-7): one to add the water, and a new one for every dose.
- Alcohol swabs and a sharps container, a puncture-proof box for used needles.

Bacteriostatic water is sterile water with 0.9% benzyl alcohol (some bottles 1.1%), a preservative that lets a multiple-dose container be entered again and again[3](https://pepvault.app/guides/how-to-reconstitute-peptides#source-3). Plain sterile water has no preservative, so it suits a vial that is used up in one go; one somatropin label says a vial mixed with sterile water gives one dose only[5](https://pepvault.app/guides/how-to-reconstitute-peptides#source-5). For a vial you will draw from for days or weeks, the bacteriostatic kind is the one to use. The glossary's entry on bacteriostatic water covers the rest.

<!--promo-->

PepVault for iPhone

## Keep your protocol in PepVault

PepVault records the vial you mixed: the strength printed on the label, the date you mixed it and a batch note. Its expiry warning starts at 28 days and takes any window you set, so the vial reads like "Mixed Nov 20 · good to Dec 18".

[Download on the App Store](https://apps.apple.com/app/apple-store/id6779318649?pt=129020030&ct=guide-card-flow&mt=8)

7 days free on the yearly plan for new subscribers.

<!--/promo-->

## What does reconstituting a peptide actually do?

Most research peptides arrive lyophilized, which means freeze-dried: a dry white cake or a few flakes at the bottom of a small glass vial. Approved peptide products such as somatropin (growth hormone) and tesamorelin ship the same way, as a powder with the liquid packed beside it[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4) [6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6). Reconstituting is adding a measured amount of that liquid so the powder dissolves into something a syringe can measure.

**The water never changes how much peptide is in the vial, only how concentrated it is.** A 5 mg vial holds 5,000 mcg, which is twenty 250 mcg doses whether you add 1 mL or 3 mL. What changes is the concentration, the amount of peptide in each millilitre (mg/mL), and with it how far you pull the plunger for each dose.

## How much bacteriostatic water should you add?

There is no single correct volume. The best one puts your dose on a clean, readable mark of the syringe. Three numbers decide it: the vial's milligrams, the millilitres of water and the dose. One formula links them, the same one PepVault's website calculator runs: **units = dose in mcg × water in mL ÷ (vial in mg × 10).**

Here it is for a 5 mg BPC-157 vial and a 250 mcg dose, the low end of the 200 to 500 mcg range PepVault's library lists from community use. With 2 mL of water: 250 × 2 ÷ (5 × 10) = 10 units, which is 0.1 mL. The vial is then 2.5 mg/mL and holds 20 doses of that size.

| Vial | Water | Strength | 250 mcg is | 500 mcg is |
| --- | --- | --- | --- | --- |
| 5 mg | 1 mL | 5 mg/mL | 5 units | 10 units |
| 5 mg | 2 mL | 2.5 mg/mL | 10 units | 20 units |
| 5 mg | 2.5 mL | 2 mg/mL | 12.5 units (between whole marks) | 25 units |
| 5 mg | 3 mL | 1.67 mg/mL | 15 units | 30 units |
| 10 mg | 2 mL | 5 mg/mL | 5 units | 10 units |

Two patterns stand out. Too little water makes the draw tiny: at 5 units, one unit off is a 20% error. The FDA's alert on dosing errors with compounded semaglutide vials describes several reports of patients told to draw small doses, such as 5 units (0.05 mL), with a 1 mL U-100 syringe[7](https://pepvault.app/guides/how-to-reconstitute-peptides#source-7). And an odd volume such as 2.5 mL puts 250 mcg between the whole-unit marks. For that dose, 2 mL lands it on the numbered 10 mark. The water also has to fit in the vial, so check its size before planning 3 mL.

Try it

Work out your draw

The calculator the app uses. Put in your vial, your water and your dose, and it shows the units to draw on a U-100 syringe.

[Try the 3D Reconstitution Lab](https://pepvault.app/lab)

Your vial and dose

Example numbers

Draw to 40 units on a U-100 syringe. Lands on a numbered mark. Concentration 5 mg per mL, 5 doses per vial.

Draw to

40 units on a U-100 syringe

Lands on a numbered mark

0.5 mL insulin syringe · 50 units

- **Concentration:** 5 mg/mL 5,000 mcg/mL
- **Doses per vial:** 5

## With this guide

### BPC-157

- [BPC-157: the full reference](https://pepvault.app/peptides/bpc-157)
- [BPC-157 dose guide](https://pepvault.app/lab/dosage/bpc-157)

### Mixing charts

- [5 mg vial](https://pepvault.app/tools/reconstitution-calculator/bpc-157-5mg)
- [10 mg vial](https://pepvault.app/tools/reconstitution-calculator/bpc-157-10mg)

### Studies

- [BPC-157: 10 of 12 women reported full interstitial cystitis relief](https://pepvault.app/research/bpc-157-lee-2024)
- [BPC-157: 14 of 16 reported knee pain relief in a chart review](https://pepvault.app/research/bpc-157-lee-2021)
- [BPC-157: non-significant tendon gains in rats; TB-500 did better](https://pepvault.app/research/bpc-157-bicer-2026)
- [All 14 studies](https://pepvault.app/research#bpc-157)

### Compared with

- [Retatrutide vs BPC-157](https://pepvault.app/peptides/compare/retatrutide-vs-bpc-157)
- [Semaglutide vs BPC-157](https://pepvault.app/peptides/compare/semaglutide-vs-bpc-157)
- [BPC-157 vs TB-500](https://pepvault.app/peptides/compare/bpc-157-vs-tb-500)
- [KPV vs BPC-157](https://pepvault.app/peptides/compare/kpv-vs-bpc-157)
- [GHK-Cu vs BPC-157](https://pepvault.app/peptides/compare/ghk-cu-vs-bpc-157)
- [BPC-157 vs Thymosin Beta-4](https://pepvault.app/peptides/compare/bpc-157-vs-thymosin-beta-4)

### Tools

- [Reconstitution calculator](https://pepvault.app/tools/reconstitution-calculator)
- [How long will my vial last?](https://pepvault.app/tools/how-long-will-my-vial-last)
- [Is my mixed vial still good?](https://pepvault.app/tools/reconstituted-peptide-expiry)
- [Half-life calculator](https://pepvault.app/tools/peptide-half-life-calculator)

### The Getting started path

- [What are peptides? Are they steroids, and are they safe?](https://pepvault.app/guides/what-are-peptides)
- [What is bacteriostatic water?](https://pepvault.app/guides/bacteriostatic-water-explained)
- [How to read an insulin syringe](https://pepvault.app/guides/how-to-read-an-insulin-syringe)
- [How to reconstitute tirzepatide](https://pepvault.app/guides/how-to-reconstitute-tirzepatide)
- [How to reconstitute semaglutide](https://pepvault.app/guides/how-to-reconstitute-semaglutide)
- [How to reconstitute retatrutide](https://pepvault.app/guides/how-to-reconstitute-retatrutide)
- [How many units is 2.5 mg of tirzepatide?](https://pepvault.app/guides/how-many-units-is-2-5-mg)
- [Can you mix peptides in the same syringe?](https://pepvault.app/guides/mixing-peptides-in-one-syringe)
- [Where to inject peptides under the skin](https://pepvault.app/guides/where-to-inject-peptides)
- [How to store peptides at home and on trips](https://pepvault.app/guides/how-to-store-peptides)
- [What to take alongside each peptide](https://pepvault.app/guides/what-to-take-with-peptides)
- [How to read a peptide COA, line by line](https://pepvault.app/guides/how-to-read-a-peptide-coa)
- [How to read a peptide study](https://pepvault.app/guides/how-to-read-a-peptide-study)
- [Injection site rotation: a plan for daily, weekly and twice-daily shots](https://pepvault.app/guides/injection-site-rotation)
- [Peptide pens vs vials: which is better?](https://pepvault.app/guides/peptide-pens-vs-vials)
- [Peptide half-life explained, with a chart of real half-lives](https://pepvault.app/guides/peptide-half-life-explained)
- [Peptide side effects: what to expect in general](https://pepvault.app/guides/peptide-side-effects)
- [Peptide therapy: what clinics offer, what is proven, cost and insurance](https://pepvault.app/guides/peptide-therapy)
- [Are peptides safe in pregnancy, and before trying to conceive?](https://pepvault.app/guides/peptides-and-pregnancy)
- [Blood tests before starting a GLP-1 or a peptide, and which to repeat](https://pepvault.app/guides/blood-tests-before-starting)

### Terms on this page

- [Peptide](https://pepvault.app/glossary/peptide)
- [Lyophilized](https://pepvault.app/glossary/lyophilized)
- [Reconstitution](https://pepvault.app/glossary/reconstitution)
- [Bacteriostatic water](https://pepvault.app/glossary/bacteriostatic-water)
- [Vial](https://pepvault.app/glossary/vial)
- [Concentration](https://pepvault.app/glossary/concentration)
- [U-100 syringe](https://pepvault.app/glossary/u-100-syringe)
- [Unit (on a syringe)](https://pepvault.app/glossary/syringe-units)

## How do you draw the water into the syringe?

1. Wash and dry your hands[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
2. Lay out the peptide vial, the water, a new syringe, alcohol swabs and the sharps container on a clean, flat surface[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
3. Flip the plastic caps off both vials[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4) [6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
4. Wipe each rubber stopper with an alcohol swab, and don't touch a stopper once it is clean[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4) [6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
5. Pull the plunger back to your planned volume, which fills the syringe with air[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
6. Push the needle straight into the water bottle's stopper[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
7. Turn the bottle and syringe upside down together[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
8. Push the air into the bottle[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
9. Pull the plunger slowly back to your mark[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
10. Turn the bottle right side up and take the needle out[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
11. Hold the syringe needle up and tap it so large bubbles rise to the top[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
12. Push the plunger up slowly until the bubbles are out and it sits on your mark[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).

## How do you mix a peptide vial, step by step?

1. Push the needle through the peptide vial's stopper[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4).
2. Point the needle at the glass wall and push the plunger slowly, so the water runs down the side and not onto the powder. Both somatropin labels say to aim at the wall to prevent foaming[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4) [5](https://pepvault.app/guides/how-to-reconstitute-peptides#source-5).
3. Take the needle out and drop the syringe in the sharps container. The rule is one needle, one syringe, only one time[1](https://pepvault.app/guides/how-to-reconstitute-peptides#source-1).
4. Swirl the vial gently in small circles until the powder is gone. Do not shake it: the somatropin label says shaking or vigorous mixing makes the solution cloudy[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4).
5. Let it rest a few seconds so any foam settles[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
6. Hold it to the light. It should be clear, with no particles and no change of colour[3](https://pepvault.app/guides/how-to-reconstitute-peptides#source-3) [6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6); if it isn't, don't use it[3](https://pepvault.app/guides/how-to-reconstitute-peptides#source-3) [4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4).
7. Write the date you mixed it and its strength (for example, "2.5 mg/mL") on the vial label[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4).

Look at where the water lands: on the glass above the powder, never on the cake itself. That is what keeps it from foaming.

<!--promo-->

PepVault records the vial you mixed: the strength printed on the label, the date you mixed it and a batch note. Its expiry warning starts at 28 days and takes any window you set, so the vial reads like "Mixed Nov 20 · good to Dec 18". [Track your vials in PepVault](https://apps.apple.com/app/apple-store/id6779318649?pt=129020030&ct=guide-how-to-reconstitute-peptides-inlin&mt=8)

<!--/promo-->

## How do you draw a dose from a mixed vial?

The slips that matter are about units, not mixing. The FDA said that unfamiliarity with drawing from a vial, together with confusion between millilitres, milligrams and units, may have contributed to dosing errors[7](https://pepvault.app/guides/how-to-reconstitute-peptides#source-7). The three checks that catch the usual ones sit inside the steps below.

1. Take a new U-100 syringe. A vial is always entered with a new needle and a new syringe[2](https://pepvault.app/guides/how-to-reconstitute-peptides#source-2). The units in this guide assume U-100: a U-40 syringe holds 40 units per mL, so a U-100 count drawn on it is 2.5 times the volume.
2. Wipe the stopper with a fresh alcohol swab[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4) [6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
3. Check your dose is in the right unit: 250 mcg is 0.25 mg, and a dose in the wrong one is off by a factor of 1,000.
4. Pull the plunger back to the units of your dose, which fills the syringe with air[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4).
5. Push the needle through the centre of the stopper[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4).
6. Push the air into the vial[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4).
7. Turn the vial upside down, keeping the needle tip under the liquid[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4).
8. Pull the plunger slowly to your mark[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4) [6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6). On a U-100 syringe a unit is a hundredth of a millilitre, so 10 units is 0.1 mL[7](https://pepvault.app/guides/how-to-reconstitute-peptides#source-7).
9. Tap the syringe so any bubbles rise to the top[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
10. Push the plunger to the exact line[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).
11. Take the needle out of the vial. Never leave a needle in the stopper for later[1](https://pepvault.app/guides/how-to-reconstitute-peptides#source-1).

Read the dose where the plunger tip (the rubber edge nearest the needle) meets the line. This is 10 units, 0.1 mL: 250 mcg from a 5 mg vial mixed with 2 mL.

Keep the needle tip below the liquid line; if it rises into the air pocket, the syringe fills with air instead of dose.

<!--promo-->

PepVault counts doses left from the label's amount and the doses you log, and shows the draw you typed as your own record ("Your draw · 10 u"). The app works out no units: those come from your own math or the website calculator. [Track your vials in PepVault](https://apps.apple.com/app/apple-store/id6779318649?pt=129020030&ct=guide-how-to-reconstitute-peptides-inlin&mt=8)

<!--/promo-->

## How long does a mixed peptide vial last?

Store it the way the somatropin label stores its mixed vial: in the fridge at 2–8 °C, protected from light and never frozen[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4). Tesamorelin is the exception that shows labels differ: once mixed it stays at room temperature and is not refrigerated[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6).

How long a mixed research vial lasts is where the published data runs out. We found no published study of BPC-157's stability in bacteriostatic water. The water's own label says not to store a reconstituted drug unless that drug's maker says you can[3](https://pepvault.app/guides/how-to-reconstitute-peptides#source-3), and a research vial comes with no such instructions. The closest reference points come from approved products:

| Product, once opened or mixed | Kept | Discarded after |
| --- | --- | --- |
| Somatropin 5 mg vial (Zomacton) | Fridge | 14 days[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4) |
| Somatropin 10 mg vial (Zomacton) | Fridge | 28 days[4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4) |
| Tesamorelin vial (Egrifta WR) | Room temperature | 7 days[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6) |
| Bacteriostatic water bottle | Room temperature | 28 days after first use[6](https://pepvault.app/guides/how-to-reconstitute-peptides#source-6) |
| Any opened multi-dose vial, in clinics | As labelled | 28 days, unless the maker says otherwise[1](https://pepvault.app/guides/how-to-reconstitute-peptides#source-1) |

**Commonly reported:** users keep mixed research vials in the fridge and choose the vial size and dose so each vial is finished within about four weeks. That is a habit people report, not a measured shelf life.

At 250 mcg a day, a 5 mg vial is used up in 20 days. The reconstituted peptide expiry tool on the site does that date math for any vial. If the liquid turns cloudy, grows particles or changes colour, it is not used[3](https://pepvault.app/guides/how-to-reconstitute-peptides#source-3) [4](https://pepvault.app/guides/how-to-reconstitute-peptides#source-4).

**When to get help** If an injection site turns redder, more swollen or more painful over the next few days instead of settling, or you get a fever, have a doctor look at it.

## Is it different for tirzepatide or semaglutide?

The method is the same; the numbers change. GLP-1 vials hold more milligrams, the doses are counted in milligrams rather than micrograms, and the dose changes over time, so the water is chosen for the dose you are on now. The tirzepatide and semaglutide guides work through those vials, and the units guide shows why 2.5 mg has no fixed number of units. The reconstitution calculator also has a page for each common vial, from BPC-157 5 mg to tirzepatide 60 mg.

<!--promo-->

[Track it in the app](https://apps.apple.com/app/apple-store/id6779318649?pt=129020030&ct=guide-card-next&mt=8)

<!--/promo-->

## Sources

1. Centers for Disease Control and Prevention. Preventing unsafe injection practices. Injection Safety. 2024. [cdc.gov](https://www.cdc.gov/injection-safety/hcp/clinical-safety/index.html)
2. Centers for Disease Control and Prevention. Considerations for blood glucose monitoring and insulin administration. Injection Safety. 2024. [cdc.gov](https://www.cdc.gov/injection-safety/hcp/infection-control/index.html)
3. Hospira. Bacteriostatic Water for Injection, USP: prescribing information. DailyMed. [dailymed.nlm.nih.gov](https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=87d6e9dc-fe3b-4593-ac9a-d7493d1959c7)
4. Ferring Pharmaceuticals. ZOMACTON (somatropin) for injection: prescribing information and Instructions for Use. DailyMed. [dailymed.nlm.nih.gov](https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=85ba081b-bee0-4a9a-aa0f-ae5b5e9a0886)
5. EMD Serono. SEROSTIM (somatropin) for injection: prescribing information. DailyMed. [dailymed.nlm.nih.gov](https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=62b01d29-90f0-45b2-a0c4-3a750ba36c8a)
6. Theratechnologies. EGRIFTA WR (tesamorelin) for injection: prescribing information and Instructions for Use. Revised 03/2025. DailyMed. [dailymed.nlm.nih.gov](https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=839334d3-8c1d-4c26-9036-2ab524a6ea75)
7. U.S. Food and Drug Administration. FDA alerts health care providers, compounders and patients of dosing errors associated with compounded injectable semaglutide products. 2024. [fda.gov](https://www.fda.gov/drugs/human-drug-compounding/fda-alerts-health-care-providers-compounders-and-patients-dosing-errors-associated-compounded)

<!--promo-->

Newsletter · Weekly

## The weekly peptide briefing.

New guides, the week’s peptide news, one tool. Free, one email a week, unsubscribe anytime.

<!--/promo-->

## Next guide · Getting started

Guide · Getting started

### [What is bacteriostatic water?](https://pepvault.app/guides/bacteriostatic-water-explained)

Bacteriostatic water is sterile water with benzyl alcohol, usually 0.9%, for vials used more than once. How it differs from sterile water and how long it keeps.

Read the next guide

<!--promo-->

PepVault for iPhone

## Keep your protocol in PepVault

Log every dose, track every vial, and see your protocol come together.

[Download on the App Store](https://apps.apple.com/app/apple-store/id6779318649?pt=129020030&ct=guide-card-end&mt=8)

7 days free on the yearly plan for new subscribers.

[Explore the live demo](https://pepvault.app/login)

<!--/promo-->

## In the library

- [BPC-157 Studied range: 200–500 mcg](https://pepvault.app/peptides/bpc-157)

## Related guides

- Guide · Getting started

  ### [How to reconstitute tirzepatide](https://pepvault.app/guides/how-to-reconstitute-tirzepatide)

  How much bacteriostatic water to add to a tirzepatide vial, how to mix it, how to draw a dose in insulin-syringe units, and how to store it.

  Read the guide
- Guide · Getting started

  ### [How to reconstitute semaglutide](https://pepvault.app/guides/how-to-reconstitute-semaglutide)

  How much bacteriostatic water to add to a semaglutide vial, how to mix it, how to draw small doses in insulin-syringe units, and how to store it cold.

  Read the guide
- Guide · Getting started

  ### [How many units is 2.5 mg of tirzepatide?](https://pepvault.app/guides/how-many-units-is-2-5-mg)

  2.5 mg has no fixed unit count: it depends on the vial's strength. At 10 mg/mL it is 25 units on a U-100 syringe; at 5 mg/mL, 50. How to read the marks.

  Read the guide
- Guide · Getting started

  ### [Where to inject peptides under the skin](https://pepvault.app/guides/where-to-inject-peptides)

  Where to inject subcutaneous peptides: belly, thigh or upper arm, how far from the navel, why rotating sites matters, and what is normal at the site after.

  Read the guide

## Guides

- [All guides](https://pepvault.app/guides)
- [How we research](https://pepvault.app/guides/how-we-research)

<!--promo-->

PepVault for iPhone

## Keep your protocol in PepVault

Log every dose, track every vial, and see your protocol come together.

[Download on the App Store](https://apps.apple.com/app/apple-store/id6779318649?pt=129020030&ct=guide-card-rail&mt=8)

7 days free on the yearly plan for new subscribers.

<!--/promo-->

## With this guide

### BPC-157

- [BPC-157: the full reference](https://pepvault.app/peptides/bpc-157)
- [BPC-157 dose guide](https://pepvault.app/lab/dosage/bpc-157)

### Mixing charts

- [5 mg vial](https://pepvault.app/tools/reconstitution-calculator/bpc-157-5mg)
- [10 mg vial](https://pepvault.app/tools/reconstitution-calculator/bpc-157-10mg)

### Studies

- [BPC-157: 10 of 12 women reported full interstitial cystitis relief](https://pepvault.app/research/bpc-157-lee-2024)
- [BPC-157: 14 of 16 reported knee pain relief in a chart review](https://pepvault.app/research/bpc-157-lee-2021)
- [BPC-157: non-significant tendon gains in rats; TB-500 did better](https://pepvault.app/research/bpc-157-bicer-2026)
- [All 14 studies](https://pepvault.app/research#bpc-157)

### Compared with

- [Retatrutide vs BPC-157](https://pepvault.app/peptides/compare/retatrutide-vs-bpc-157)
- [Semaglutide vs BPC-157](https://pepvault.app/peptides/compare/semaglutide-vs-bpc-157)
- [BPC-157 vs TB-500](https://pepvault.app/peptides/compare/bpc-157-vs-tb-500)
- [KPV vs BPC-157](https://pepvault.app/peptides/compare/kpv-vs-bpc-157)
- [GHK-Cu vs BPC-157](https://pepvault.app/peptides/compare/ghk-cu-vs-bpc-157)
- [BPC-157 vs Thymosin Beta-4](https://pepvault.app/peptides/compare/bpc-157-vs-thymosin-beta-4)

### Tools

- [Reconstitution calculator](https://pepvault.app/tools/reconstitution-calculator)
- [How long will my vial last?](https://pepvault.app/tools/how-long-will-my-vial-last)
- [Is my mixed vial still good?](https://pepvault.app/tools/reconstituted-peptide-expiry)
- [Half-life calculator](https://pepvault.app/tools/peptide-half-life-calculator)

### The Getting started path

- [What are peptides? Are they steroids, and are they safe?](https://pepvault.app/guides/what-are-peptides)
- [What is bacteriostatic water?](https://pepvault.app/guides/bacteriostatic-water-explained)
- [How to read an insulin syringe](https://pepvault.app/guides/how-to-read-an-insulin-syringe)
- [How to reconstitute tirzepatide](https://pepvault.app/guides/how-to-reconstitute-tirzepatide)
- [How to reconstitute semaglutide](https://pepvault.app/guides/how-to-reconstitute-semaglutide)
- [How to reconstitute retatrutide](https://pepvault.app/guides/how-to-reconstitute-retatrutide)
- [How many units is 2.5 mg of tirzepatide?](https://pepvault.app/guides/how-many-units-is-2-5-mg)
- [Can you mix peptides in the same syringe?](https://pepvault.app/guides/mixing-peptides-in-one-syringe)
- [Where to inject peptides under the skin](https://pepvault.app/guides/where-to-inject-peptides)
- [How to store peptides at home and on trips](https://pepvault.app/guides/how-to-store-peptides)
- [What to take alongside each peptide](https://pepvault.app/guides/what-to-take-with-peptides)
- [How to read a peptide COA, line by line](https://pepvault.app/guides/how-to-read-a-peptide-coa)
- [How to read a peptide study](https://pepvault.app/guides/how-to-read-a-peptide-study)
- [Injection site rotation: a plan for daily, weekly and twice-daily shots](https://pepvault.app/guides/injection-site-rotation)
- [Peptide pens vs vials: which is better?](https://pepvault.app/guides/peptide-pens-vs-vials)
- [Peptide half-life explained, with a chart of real half-lives](https://pepvault.app/guides/peptide-half-life-explained)
- [Peptide side effects: what to expect in general](https://pepvault.app/guides/peptide-side-effects)
- [Peptide therapy: what clinics offer, what is proven, cost and insurance](https://pepvault.app/guides/peptide-therapy)
- [Are peptides safe in pregnancy, and before trying to conceive?](https://pepvault.app/guides/peptides-and-pregnancy)
- [Blood tests before starting a GLP-1 or a peptide, and which to repeat](https://pepvault.app/guides/blood-tests-before-starting)

### Terms on this page

- [Peptide](https://pepvault.app/glossary/peptide)
- [Lyophilized](https://pepvault.app/glossary/lyophilized)
- [Reconstitution](https://pepvault.app/glossary/reconstitution)
- [Bacteriostatic water](https://pepvault.app/glossary/bacteriostatic-water)
- [Vial](https://pepvault.app/glossary/vial)
- [Concentration](https://pepvault.app/glossary/concentration)
- [U-100 syringe](https://pepvault.app/glossary/u-100-syringe)
- [Unit (on a syringe)](https://pepvault.app/glossary/syringe-units)

<!--promo-->

PepVault for iPhone

## Keep your protocol in PepVault

Log every dose, track every vial, and see your protocol come together.

[Download on the App Store](https://apps.apple.com/app/apple-store/id6779318649?pt=129020030&ct=guide-card-sticky&mt=8)

7 days free on the yearly plan for new subscribers.

[Explore the live demo](https://pepvault.app/login)

<!--/promo-->

PepVault is a research and tracking resource, not medical advice. Ranges are what studies used, never a dose for you. Brand names are trademarks of their owners; PepVault is independent of them.

PepVault is a private research and tracking tool, not medical advice. The information here is reference material from published literature and community use — always verify it and discuss any protocol with a qualified clinician before changing it.

© 2026 PepVault. Our text, data and tools may not be copied, scraped or republished without [permission](https://pepvault.app/terms#content).
